Our earth's interior - like the sun - provides heat energy from nature. This heat - geothermal energy - yields warmth and power that we can use without polluting the environment.
Geothermal heat originates from Earth's fiery consolidation of dust and gas over 4 billion years ago. At earth's core - 4,000 miles deep - temperatures may reach over 9,000 degrees F.
The heat from the earth's core continuously flows outward. It transfers (conducts) to the surrounding layer of rock, the mantle. When temperatures and pressures become high enough, some mantle rock melts, becoming magma. Then, because it is lighter (less dense) than the surrounding rock, the magma rises (convects), moving slowly up toward the earth's crust, carrying the heat from below.
Sometimes the hot magma reaches all the way to the surface, where we know it as lava. But most often the magma remains below earth's crust, heating nearby rock and water (rainwater that has seeped deep into the earth) - sometimes as hot as 700 degrees F. Some of this hot geothermal water travels back up through faults and cracks and reaches the earth's surface as hot springs or geysers, but most of it stays deep underground, trapped in cracks and porous rock. This natural collection of hot water is called a geothermal reservoir.
In the United States there are enough geothermal power plants to generate electricity and power for three and a half million homes (two thousand seven hundred megawatts).
How We Use Geothermal Energy Today:
Today we drill wells into the geothermal reservoirs to bring the hot water to the surface. Geologists, geochemists, drillers and engineers do a lot of exploring and testing to locate underground areas that contain this geothermal water, so we'll know where to drill geothermal production wells. Then, once the hot water and/or steam travels up the wells to the surface, they can be used to generate electricity in geothermal power plants or for energy saving non-electrical purposes.
In geothermal power plants steam, heat or hot water from geothermal reservoirs provides the force that spins the turbine generators and produces electricity. The used geothermal water is then returned down an injection well into the reservoir to be reheated, to maintain pressure, and to sustain the reservoir.
There are two types of power plants: a Flash Steam Power Plant and a Binary Cycle Power Plant.
Flash Steam Power Plant:
Flash steam plants are the most common type of geothermal power generation plants in operation today. They use water at temperatures greater than 360° F (182° C) that is pumped under high pressure to the generation equipment at the surface. Upon reaching the generation equipment the pressure is suddenly reduced, allowing some of the hot water to convert or "flash" into steam. This steam is then used to power the turbine/generator units to produce electricity. The remaining hot water not flashed into steam, and the water condensed from the steam is generally pumped back into the reservoir.
Binary System:
In the Binary system, the water from the geothermal reservoir is used to heat another "working fluid" which is vaporized and used to turn the turbine/generator units. The geothermal water, and the "working fluid" are each confined in separate circulating systems or "closed loops" and never come in contact with each other. The advantage of the Binary Cycle plant is that they can operate with lower temperature waters (225° F - 360° F), by using working fluids that have an even lower boiling point than water. They also produce no air emissions.
Is It A Viable, Long-Term Solution For The Future?
Environmental Issues:
There are little to no emissions
Geothermal power plants, like wind and solar power plants, do not have to burn fuels to manufacture steam to turn the turbines. Generating electricity with geothermal energy helps to conserve nonrenewable fossil fuels, and by decreasing the use of these fuels, we reduce emissions that harm our atmosphere.
It is environmentally friendly
Geothermal installations don't require damming of rivers or harvesting of forests -- and there are no mine shafts, tunnels, open pits, waste heaps or oil spills.
Technological Issues:
The power plants are reliable
Geothermal power plants are designed to run 24 hours a day, all year. A geothermal power plant sits right on top of its fuel source. It is resistant to interruptions of power generation due to weather, natural disasters or political rifts that can interrupt transportation of fuels.
The power plants have flexibility
Geothermal power plants can have modular designs, with additional units installed in increments when needed to fit growing demand for electricity.
Geothermal energy can be extracted from anywhere there are hot spots, U.S. to Third-World
Geothermal projects can offer all of the above benefits to help developing countries grow without pollution. And installations in remote locations can raise the standard of living and quality of life by bringing electricity to people far from "electrified" population centers.
Thousands more megawatts of power than are currently being produced could be developed from already-identified hydrothermal resources. With improvements in technology, much more power will become available.
Usable geothermal resources will not be limited to the "shallow" hydrothermal reservoirs at the crustal plate boundaries. Much of the world is underlain (3-6 miles down), by hot dry rock - no water, but lots of heat. Scientists in the U.S.A., Japan, England, France, Germany and Belgium have experimented with piping water into this deep hot rock to create more hydrothermal resources for use in geothermal power plants.
As drilling technology improves, allowing us to drill much deeper, geothermal energy from hot dry rock could be available anywhere. At such time, we will be able to tap the true potential of the enormous heat resources of the earth's crust. (ArticlesBase SC #171771)
